Futuristic 3D Printed Water Pump

1 hours claimed

I finished sanding the first impeller design. I also tested it to make sure it rotated evenly inside the cover and did not move in an oval shape. After making sure everything was spinning correctly, I used five M3 screws to seal the casing together. In the next log, I will test the pump with water and see how well the first impeller design actually works.

1 hours claimed

First, I checked for some errors in the outlet and fixed them. I noticed that one of the planes was slightly higher than the one next to it, which was causing the outlet to be uneven. After fixing that, I decided to add a locking top cover. I made an indent in the top cover and then created the same recess in the main casing so the two parts can fit together. This should help lock the cover in place and create a better watertight seal.